Single-Strand Necklace and Earring Set with Crystal Passions® Beads and Metal and Druzy Agate Gemstone Drops and Links

Cut the following lengths:

• Accu-Flex® professional-quality beading wire:
  • One 7-inch
  • One 4-inch
  • Two 3-1/2 inch
• Six 1/2 inch lengths of French wire
• Sterling silver chain
  • One 2-inch
  • One 2-1/4 inch

Creating the links

String the following onto one 2-1/2 inch eye pin:

• One light rose golden shadow 4mm bicone
• One light turquoise luminous green 3mm bicone
• One light rose golden shadow 6mm bicone
• One light turquoise luminous green 3mm bicone
• One light rose golden shadow 4mm bicone

Form a simple loop, creating a link.

Repeat to create a total of three links.

Creating the Dangles

String the following onto one 3-1/2 inch length of beading wire: one crimp and one length of French wire. Pass the beading wire back through the crimp. Pull the beading wire so the crimp rests snug against the French wire leaving approximately 1/4 inch length of beading wire on the end.

Crimp then trim the excess from the short end of the beading wire. Finish with a 4mm crimp cover.

Continue to string onto the beading wire:

• One 2mm sterling silver round
• Two 3mm sterling silver rounds
• One 2mm sterling silver round
• One light turquoise luminous green 3mm bicone
• One light rose golden shadow 4mm bicone
  
  
• One light rose golden shadow 6mm bicone
• One light rose golden shadow 4mm bicone
• One light turquoise luminous green 3mm bicone

Repeat this sequence for a total of two times.

Continue to string the following onto the beading wire:

• One 2mm sterling silver round
• Two 3mm sterling silver rounds
• One 2mm sterling silver round
• One light turquoise luminous green 3mm bicone
• One light rose golden shadow 4mm bicone
  
  
• One light rose golden shadow 6mm bicone
• One 2mm crimp

Pass the beading wire back through the crimp bead. Pull the beading wire so the crimp rests snug against the 3mm bicone leaving approximately 1/4 inch of beading wire on the end. Crimp the crimp bead then trim the excess from the short end of the beading wire. Finish with a 4mm crimp cover, creating a 3-1/2 inch dangle.

Repeat Steps 3 through 5 using the remaining 3-1/2 inch length of beading wire, creating a second 3-1/2 inch dangle.

Repeat Step 3 then string the following onto the 4-inch length of beading wire:

• Three sets of:
  • One 2mm sterling silver round
  • One 3mm sterling silver round
  • One light rose golden shadow 4mm bicone
  • One light rose golden shadow 6mm bicone
  • One light rose golden shadow 4mm bicone
  • One 3mm sterling silver round
  • One 2mm sterling silver round
  • One light turquoise luminous green 3mm bicone
• One 2mm sterling silver round
• One 3mm sterling silver round
• One light rose golden shadow 4mm bicone
• One light rose golden shadow 6mm bicone
• One light rose golden shadow 4mm bicone
• One 3mm sterling silver round
• One 2mm sterling silver round

Repeat Step 3, creating a 4-inch dangle.

Creating the Strands

Repeat Step 3 then string the following onto the 7-inch length of beading wire:

• One 2mm sterling silver
• One 3mm sterling silver
• One 2mm sterling silver
• Five sets of:
  • One light turquoise luminous green 3mm bicone
  • One 2mm sterling silver
  • One 3mm sterling silver
  • One light rose golden shadow 4mm bicone
  • One light rose golden shadow 6mm bicone
  • One light rose golden shadow 4mm bicone
  • One 3mm sterling silver
  • One 2mm sterling silver
• One 2mm sterling silver round
• One 3mm sterling silver round
• One light rose golden shadow 4mm bicone
• One light rose golden shadow 6mm bicone
• One light rose golden shadow 4mm bicone
• One 3mm sterling silver round
• One 2mm sterling silver round

Repeat Step 3, creating a beaded strand.

Use 4mm jump rings to connect the following end-to-end:

• One portion of the toggle clasp to one length of chain
• The length of chain to one link created in Step 2
• The previous link to one druzy agate link
• The previous druzy agate link to one link created in Step 2
• The previous link to one druzy agate link
  
  
• The previous druzy agate link to one link created in Step 2
• The previous link to one druzy agate link
• The previous druzy agate link to another druzy agate link
• The previous druzy agate link to a fourth (in total) druzy agate link

Use 4mm jump rings to connect the following end-to-end:

• The remaining portion of the toggle clasp to the remaining length of chain
• The length of chain to the beaded strand
• The beaded strand to the same loop used in the last druzy agate link connected in Step 9

Pass one 4mm jump ring through the loop on one 3-1/2 inch dangle to the remaining loop on the last druzy agate connected in Step 9 then close.

Repeat using the 4-inch dangle.

Repeat using the 3-1/2 inch dangle.

Cut two 3-inch lengths of Accu-Flex beading wire and two 1/4 inch lengths of French wire.

String the following onto one length of beading wire: one crimp and one length of French wire. Pass the beading wire back through the crimp. Pull the beading wire so the crimp rests snug against the French wire leaving approximately 1/4 inch length of beading wire on the end.

Crimp, then trim the excess from the short end of the beading wire. Finish with a 4mm crimp cover.

Continue to string the following onto the beading wire:

• One 2mm sterling silver bead
• Two 3mm sterling silver beads
• One 2mm sterling silver bead
• One light turquoise luminous green 3mm bicone
• One light rose golden shadow 4mm bicone
• One light rose golden shadow 6mm bicone

Repeat Step 2, creating a strand.

Attach one end of the strand to the ear wire.

Use one 4mm jump ring to attach one druzy agate drop to opposite end of the strand, creating an earring.

Repeat Steps 2 through 4 to create a second earring.